Skip to content

US PPI — Aluminum Mill Shapes

Producer Price Index for aluminum mill shapes, sheet, plate, bar, rod, and similar semi-finished aluminum products, part of WPU102 (Nonferrous Metals). Index base: 1982 = 100.

This index is still building its first snapshot. Check back shortly.

Get an email when BLS publishes the next number.

Use it in a contract

Need a cap, a floor or a different base month? Open the full escalation calculator

Escalake can apply this every release and give both sides the same number. Start a free trial

Draft clause citing this series

A starting point citing this series by name and code. Replace the bracketed terms with your contract's actual scope before use.

The [affected portion] of the Contract Price shall be adjusted using US PPI — Aluminum Mill Shapes (BLS series WPU102501), published by BLS.

Base Period: the index value published for the month of contract signing (or the month of contract signing, if different) is the Base Value.

Adjustment: on each anniversary of the Base Period (an Adjustment Date), the Current Value is the most recently published three-month average of the index (the Averaging Window). The Escalation Factor equals Current Value divided by Base Value, and the Contract Price in effect is multiplied by it.

Annual reset: after each Adjustment Date, the Current Value used on that date becomes the new Base Value, so each adjustment reflects one year's movement.

Cap: the Escalation Factor applied on any single Adjustment Date shall not exceed 1.10 or fall below 0.90 (a 10% yearly cap and floor), regardless of the index's actual movement.

[Replace bracketed terms with your contract's actual affected-portion definition and adjustment-date schedule before use. This is a drafting starting point, not legal advice.]

How it's built

Let Escalake run this clause for you

Escalake tracks US PPI — Aluminum Mill Shapes, applies your formula, and gives both sides a number they can confirm, no spreadsheet required.

About this index

Why contracts cite this index

Aluminum extruder and fabricator supply agreements cite this series when the contract buys a mix of mill shapes rather than one specific extruded profile, which WPU10250162 (Extruded Aluminum Shapes, Including Rod, Bar, and Wire) covers instead.

How this index is used (1 guide)