US PPI — Extruded Aluminum Shapes, Including Rod, Bar, and Wire
Producer Price Index for extruded aluminum shapes, including rod, bar, and wire, a narrower product line within WPU102501 (Aluminum Mill Shapes). Index base: December 2004 = 100.
248.266+0.6% 1 mo+23.1% 1 yr+50.9% 5 yr
Up 23.1% from a year ago. Up 0.6% from the month before.
Oct 2026 value · Index Dec 2004=100, not seasonally adjusted · Next release Dec 15, 2026 · Series WPU10250162 · Source: BLS
Get the Nov 2026 number by email the day BLS publishes it.
Price history
Oct 2026 · latest248.266+50.9%since Oct 2021
Copy the values
Paste straight into Excel, Google Sheets or an email. Spreadsheet format lands as two columns.
Range
Format
Preview13 rows, newest first, as they will paste.
Month
Value
Change m/m
Oct 2026
+0.6%
Sep 2026
−1.3%
Aug 2026
−3.3%
Jul 2026
−0.2%
Jun 2026
+1.7%
May 2026
+5.9%
Apr 2026
+3.3%
Mar 2026
+2.0%
Feb 2026
+6.1%
Jan 2026
+1.6%
Dec 2025
+3.1%
Nov 2025
+1.9%
Oct 2025
+2.3%
Same numbers as the chart, straight from BLS. Dates are the first of each period, the way BLS reports them.
US PPI — Extruded Aluminum Shapes, Including Rod, Bar, and Wire by month, 2017 to 2026
US PPI — Extruded Aluminum Shapes, Including Rod, Bar, and Wire, index values by month. Source: BLS.
Escalake can apply this every release and give both sides the same number. Start a free trial
Draft clause citing this series
A starting point citing this series by name and code. Replace the bracketed terms with your contract's actual scope before use.
The [affected portion] of the Contract Price shall be adjusted using US PPI — Extruded Aluminum Shapes, Including Rod, Bar, and Wire (BLS series WPU10250162), published by BLS.
Base Period: the index value published for October 2026 (or the month of contract signing, if different) is the Base Value.
Adjustment: on each anniversary of the Base Period (an Adjustment Date), the Current Value is the most recently published three-month average of the index (the Averaging Window). The Escalation Factor equals Current Value divided by Base Value, and the Contract Price in effect is multiplied by it.
Annual reset: after each Adjustment Date, the Current Value used on that date becomes the new Base Value, so each adjustment reflects one year's movement.
Cap: the Escalation Factor applied on any single Adjustment Date shall not exceed 1.10 or fall below 0.90 (a 10% yearly cap and floor), regardless of the index's actual movement.
[Replace bracketed terms with your contract's actual affected-portion definition and adjustment-date schedule before use. This is a drafting starting point, not legal advice.]
Extruded Aluminum Shapes, Including Rod, Bar, and Wire against the aluminum price, both set to 100 in the first month they share
Sep 2026WPU10250162 240Aluminum price 183
Sources: WPU10250162 (Extruded Aluminum Shapes, Including Rod, Bar, and Wire); IMF Primary Commodity Prices via FRED, PALUMUSDM.
Since 2017, this index has followed the aluminum price about one month later and moved about two thirds as far as it over a year.
Over the 12 months to Sep 2026, the aluminum price rose 23.7%. Over the 12 months to Oct 2026, this index rose 23.1%.
Key figures
Since Jan 2017
+141.0%
103.0 to 248.3
Typical monthly move
±2.6%
over the last 12 months
Largest monthly rise
+7.4%
Apr 2022
10% yearly cap reached
18 of 36
months, vs a year earlier
From Jan 2017 to Oct 2026 the index went from 103.0 to 248.3, a change of +141.0%.
Highest reading in that period: 259.2 in Jun 2026. Lowest: 103.0 in Jan 2017.
Largest one-month rise: +7.4% in Apr 2022. Largest one-month fall: -7.2% in Jun 2022.
For a clause that resets its base every year, a 10% cap or floor would have limited the adjustment in 18 of the last 36 months.
Let Escalake run this clause for you
Escalake tracks US PPI — Extruded Aluminum Shapes, Including Rod, Bar, and Wire, applies your formula, and gives both sides a number they can confirm, no spreadsheet required.
Building facade, window frame, and heat sink suppliers that buy extruded profiles specifically use this series rather than the broader mill shapes index, since extrusion adds a die and tooling cost step that rolled sheet and plate do not carry.
Divide the current value of BLS series WPU102501 (Aluminum Mill Shapes) by its value at contract signing, then apply that ratio to the aluminum part of the price. A usable clause also names an averaging window, a rule for revised values and missing months, and a cap.